Analysis

Contents

•Enter a filename for the output CSV file:
Optional. Allows the user to specify a filename for the analysis output file. All analysis output files include timestamps and are located in the /outputs folder.

Default file naming scheme:
Analysis_Output_month_day_year_hour_minute

User specified naming scheme:
filename entered_month_day_year_hour_minute

Example file name:
Analysis_Output_06_12_2013_20_15.csv

•Parameters to Analyze:
For those values the uses wishes to run an analysis, enter the lower and upper limits of testing as well as an incremental change. For example, to run an analysis using ditch depths of 2 and 4 ft, enter 2 as the lower limit, 4 as the upper limit, and 2 as the incremental change.

Set the Incremental Change to 0 for any parameter you do not want included in the analysis. When the Incremental Change is set to 0, only the lower limit value will be used during simulation iterations..

•Conductivity Factor:
This value represents a multiplication factor applied to conductivity values.

•Reset Button:
Clicking the Reset button for any parameter sets the upper and lower limits to the values listed in the Parameters screen and the conductivity factor to a value of 1.0

•Layers to Change Conductivity:
Select the layer(s) to apply the Conductivity Factor to during the analysis routine. Select ' All ' to apply the factor to all layers.

•Current Simulation:
When running an analysis, this text box provides feedback on the parameters of the current simulation.

•# Remaining:
The number of simulation remaining in the analysis.